CraftSeal incorporate Nano Technology into the waterborne treatment that achieves in-depth penetration and surface hydrophobic effect, filling and coating subsurface pores with crystallization actions.
It is permeable to water vapors, allowing treated substrate to dry gradually without staining.
Being non-film forming and UV resistance, it does not leave a glossy finish and will not change the substrate appearance. Mainly used for sealing and waterproofing of concrete and natural stone.
It contains a solid, mild antibiotic that inhibits organic growth without affecting the environment. On application, it surface cure rapidly.
Any liquid water collected beneath the surface causes the other active components to penetrate deep into the substrate and crystallized, providing in-depth protection.
Waterproofing and Dampness sealing of:
Wipe off excess surface CraftSeal with a damp cloth or sponge. Allow it to dry for 24 hrs. The initial protection takes effect immediately upon drying.
Additional application on dried CraftSeal will results in white crystallization on treated substrate.
Finishing - The treated substrates do not require further treatment. Strong detergent will reduce the hydrophobic effect, requiring subsequent treatment.
|Form||Clear free flowing liquid|
|Flash Point||Not flammable, water borne system|
|Storage Life||1 year (in original unopened container)|
|Drying Time||< 1hr (@ 250C, 65% RH, on dry concrete)|
|Effective Cure Time||24 to 48 hours (full cure takes 1 month)|
|Coverage||8~12m2/litre (depending on substrate porosity)|
|Temperature Resistance||Max. 1600C|
|Crack Blocking||Up to 0.2mm|
|Depth of Absorption||5 to 21mm (G20 concrete without pressure)|
|Water Vapour Permeability||< 5% hindrance when compare with respective untreated substrates.|
|Chemical Resistance||Resistance to all inorganic chemicals except Caustic Soda and KOH. Partially soluble in oxygenated solvent.|
* CraftSeal is available in 2 and 5 litre packing. Contact Us on how to get it!